Enhanced mechanical properties of unidirectional basalt fiber/epoxy composites using silane-modified Na+-montmorillonite nanoclay

This study explores the effects of 3-glycidoxypropyltrimethoxysilane (3-GPTS) modified Na-montmorillonite (Na-Mt) nanoclay addition on mechanical response of unidirectional basalt fiber (UD-BF)/epoxy composite laminates under tensile, flexural and compressive loadings. Fourier transform infrared (FT-IR), X-ray diffraction (XRD) and simultaneous thermal analysis (STA) data confirmed the reaction mechanism between the silane compound and Mt. It was demonstrated that addition of 5 wt % 3-GPTS/Mt resulted in 28%, 11% and 35% increase in flexural, tensile and compressive strengths. Scanning electron microscopy (SEM) clarified the improvement in the adhesion between the basalt fibers and matrix in the case of Mt-enhanced epoxy specimens. Also, a theoretical route based on a Euler-Bernoulli beam-based approach was employed to estimate the compressive properties of the composites. The results demonstrated good agreement between theoretical and experimental approaches. Totally, the results of the study show that matrix modification is an effective strategy to improve the mechanical behavior of fibrous composites.     

In situ fabrication of paclitaxel‐loaded core‐crosslinked micelles via thiol‐ene “click” chemistry for reduction‐responsive drug release

In this study, a facile method to fabricate reduction‐responsive core‐crosslinked micelles via in situ thiol‐ene “click” reaction was reported. A series of biodegradable poly(ether‐ester)s with multiple pendent mercapto groups were first synthesized by melt polycondensation of diol poly(ethylene glycol), 1,4‐butanediol, and mercaptosuccinic acid using scandium trifluoromethanesulfonate [Sc(OTf)₃] as the catalyst. Then paclitaxel (PTX)‐loaded core‐crosslinked (CCL) micelles were successfully prepared by in situ crosslinking hydrophobic polyester blocks in aqueous media via thiol‐ene “click” chemistry using 2,2′‐dithiodiethanol diacrylate as the crosslinker. These PTX‐loaded CCL micelles with disulfide bonds exhibited reduction‐responsive behaviors in the presence of dithiothreitol (DTT). The drug release profile of the PTX‐loaded CCL micelles revealed that only a small amount of loaded PTX was released slowly in phosphate buffer solution (PBS) without DTT, while quick release was observed in the presence of 10.0 mM DTT. Cell count kit (CCK‐8) assays revealed that the reduction‐sensitive PTX‐loaded CCL micelles showed high antitumor activity toward HeLa cells, which was significantly higher than that of reduction‐insensitive counterparts and free PTX. This kind of biodegradable and biocompatible CCL micelles could serve as a bioreducible nanocarrier for the controlled antitumor drug release. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 99–107     

Structure,crystallization and dielectric resonances in 2–13 GHz of waste-derived glass-ceramic

Structure, kinetics of crystallization, and dielectric resonances of waste-derived glass-ceramic prepared via quench-heating route were studied as a function of dosage of iron ore tailing (IOT) within 20–40 wt% using X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and vector network analyzer (VNA) measurements. The glass-ceramic mainly consisted of ferrite crystals embedded in borosilicate glass matrix. Crystallization kinetics and morphologies of ferrite crystals as well as coordination transformation of boron between [BO₄] and [BO₃] in glass network were adjustable by changing the amount of IOT. Dielectric resonances in 6–13 GHz were found to be dominated by oscillations of Ca²⁺ cations in glass network with [SiO₄] units on their neighboring sites. Ni²⁺ ions made a small contribution to those resonances. Diopside formed when IOT exceeded 35 wt%, which led to weakening of the resonances.     

Structural response of stiffened plates in similitude under a turbulent boundary layer excitation

In structural dynamics, similitude laws usually deal with simple configurations as thin flat plates with point forces. Only recently, few papers have analyzed stiffened shells or stochastic pressure loads.This research activity extends the applicability of some similitude laws, developed for thin flat plates under a turbulent boundary layer load, to ribbed plates forced by the same wall pressure fluctuations.The work addresses the problem of designing a scaled experimental test-article and, successively, of re-modulating the measured data in order to get the structural response of an original (unscaled) configuration.Due to the complexity of the structural domain, the design of a scaled configuration leads to a distorted similitude. Then, a simple approach, to circumvent the distortion effects, is proposed.     

干式变压器有限元仿真模型的电磁和振动分析

随着电力需求的逐年增长,干式变压器的数量也在不断增加。干式变压器在运行时存在着振动和噪声的问题,为了对干式变压器振动的规律与特点进行研究,本文建立了干式变压器本体振动的有限元仿真模型,通过电磁分析获得相应的磁场分布,然后利用结构动力学分析得到其本体振动的相关规律。通过对处于运行状态的变压器振动数据进行实测分析,得到变压器振动的特征频率,然后对仿真结果进行对比分析,可以发现振动幅度与频率之间存在的关系。本文的研究结果可对干式变压器的减振降噪研究提供参考。     

The production of enantiomerically pure 1-phenylethanol by enzymatic kinetic resolution method using response surface methodology

As the enantiomers of 1-phenylethanol are valuable intermediates in several industries, the lipase catalyzed kinetic resolution of (R,S) -1-phenylethanol is a relevant research topic. In this study, the goal was to determine the optimum reaction parameters to produce enantiomerically pure 1-phenylethanol by lipase (Novozyme 435) catalyzed kinetic resolution using response surface methodology (RSM). Reactions were performed with 40–400 mM (R,S)-1-phenylethanol, 120–1200 mM vinyl acetate and 2–22 mg/mL biocatalyst concentrations (BC _L ), at 20–60 °C and with a stirring rate of 50–400 rpm for 5–120 min. The samples were analyzed using high performance liquid chromatography (HPLC) with a Chiralcel OB column. Optimum reaction parameters to reach 100% enantiomeric excess for the substrate ( ee _s ) were determined as follows: substrate concentration (C _s ): 240 mM, BC _L : 11 mg/mL, at 42 °C with a reaction time of 75 min. Model validation was performed using these conditions and ee _s was calculated as 100%, which indicates the predicted model was efficient and accurate. When compared to the literature, it was observed that the reaction time decreased significantly. This is an important result considering the industrial scale perspective.     

A microfluidics-dispensing-printing strategy for Janus photonic crystal microspheres towards smart patterned displays

From the implementation point of view, the printable magnetic Janus colloidal photonic crystals (CPCs) microspheres are highly desirable. Herein, we developed a dispensing-printing strategy for magnetic Janus CPCs display via a microfluidics-automatic printing system. Monodisperse core/shell colloidal particles and magnetic Fe₃O₄ nanoparticles precursor serve as inks. Based on the equilibrium of three-phase interfacial tensions, Janus structure is successfully formed, followed by UV irradiation and self-assembly of colloid particle to generate magnetic Janus CPCs microspheres. Notably, this method shows distinct superiority with highly uniform Janus CPCs structure, where the TMPTA/Fe₃O₄ hemisphere is in the bottom side while CPCs hemisphere is in the top side. Thus, by using Janus CPCs microspheres with two different structural colors as pixel points, a pattern with red flower and green leaf is achieved. Moreover, 1D linear Janus CPCs pattern encapsulated by hydrogel is also fabricated. Both the color and the shape can be changed under the traction of magnets, showing great potentials in flexible smart displays. We believe this work not only offers a new feasible pathway to construct magnetic Janus CPCs patterns by a dispensing-printable fashion, but also provides new opportunities for flexible and smart displays.     

高温、高压、高应变速率动态过程晶体塑性有限元理论模型及其应用

对于高温、高压、高应变速率加载条件下的材料冲击变形行为,动态晶体塑性模型能够直接反映晶体中塑性滑移的各向异性及其对温度、压力和微观组织结构的依赖性,因而广泛应用于材料的动态冲击力学响应、微观结构演化以及动态损伤破坏的模拟。本文综述了高压冲击下动态晶体塑性有限元的理论模型,主要包括变形运动学、包含状态方程的超弹性本构模型和晶体塑性本构模型,涉及位错滑移、相变、孪生等塑性变形机制,以及层裂、绝热剪切带等动态破坏方式。     

Biocatalytic Feedback‐Controlled Non‐Newtonian Fluids

Non‐Newtonian fluids are ubiquitous in daily life and industrial applications. Herein, we report an intelligent fluidic system integrating two distinct non‐Newtonian rheological properties mediated by an autocatalytic enzyme reaction. Associative polyelectrolytes bearing a small amount of ionic and alkyl groups are engineered: by carefully balancing the charge density and the hydrophobic effect, the polymer solutions demonstrate a unique shear thickening property at low pH while shear thinning at high pH. The urea‐urease clock reaction is utilized to program a feedback‐induced pH change, leading to a strong upturn of the nonlinear viscoelastic properties. As long as the chemical fuel is supplied, two distinct non‐Newtonian states can be achieved with a tunable lifetime span. As a proof of concept, we demonstrate how the physical energy‐driven nonequilibrium properties can be manipulated by a chemical‐fueled process.     

梁柱简化模型在自立塔塔线体系动态响应中的适用性研究

对输电塔进行合理简化可以提高塔线体系动力学仿真的效率。本文给出自立塔梁柱简化模型的计算方法，并提出利用梁柱简化模型计算方法建立自立塔塔线体系整体模型，同时采用桁梁混合模型建立精细化塔线体系整体模型，对两种模型塔线体系静力特性及振型和固有频率等动力特性进行对比分析。以脱冰工况为例，采用生死单元技术将施加在输电线节点上的集中质量单元杀死来模拟脱冰，实现对塔线体系动力学响应的有限元模拟，研究塔线体系简化模型在动态响应中的适用性。结果表明，两种模型弯曲变形误差小，低阶的振型相同，固有频率值误差小，动力特性基本相同；脱冰工况下，自立塔节点位移和塔材内力时程曲线一致，在提高计算效率的情况下，能有效保证计算精度。